Operation method of cylindrical polishing machine:

When operating the cylindrical polishing machine, install the polishing pad first to ensure that the screws have been tightened and locked; Then, the polishing program can be started. First, lift the handle release lever, and then put down the handle, so that the polishing head can freely float up and down. Turn the knob to the safety lock, and then roll the rotary handle forward to open the circular tube polisher. After the opening is successful, spread the thumb from the safety lock button. Move the circular tube polisher into a "W" shape, perhaps push the active polisher forward, and polish the floor waxing layer first. It is necessary to keep the active polishing machine moving normally after the active polishing machine is started, in order to avoid damaging the waxing layer and the floor surface; In order to avoid motor overload, the machine is equipped with circuit overload protection device. If the circuit breaker breaks, wait 10 seconds before resetting it; When the polishing process of waxing the floor is finished, the rotary handle should be rolled backward at this moment, and the safety lock button should be disengaged, so that the tube polisher can stop rolling. After the operation is finished, stick to the active polisher and lean the rear wheel back to the ground. This is done to avoid the appearance of damaging the polishing pad, and perhaps the polishing pad can be taken down and stored.

How to maintain the cylindrical polishing machine.

Regular maintenance and repair of the cylindrical polishing machine can keep the cylindrical polishing machine in good production and operation condition to ensure the normal production.

First of all, it is necessary to ensure whether the cylindrical polishing machine is placed stably and firmly, whether there is any looseness or inclination, do a good job in cleaning the machine of the cylindrical polishing machine, and regularly apply lubricating oil to the active polishing machine for production and maintenance; Check the power cord regularly to see if there is any power exposure. If so, replace the power cord in time to protect the drive motor in time. If it is found that the motor does not turn or stop, check the repair timing in time and tighten the mechanical screws of the active polishing machine.

Proper maintenance of equipment can extend the service life of equipment and improve the working efficiency in machining production.